All wall types present their unique blend of complications, but mounted correctly, nearly every wall can accommodate a quality TV mount.
Stud walls, in theory, should be uncomplicated. Find the studs, screw in the mounts securely and you’re done.
But, as simple as this sounds, we suggest taking out some time to make sure the job is done correctly.
Firstly, never mount into metal studs. Metal studs are strong, however they present a problem for screw threading, and will never be able to grip adequately due to the very thin wall sections of the studs.
When mounting into wooden studs, observe the following:
- Find the studs using a battery operated stud finder. If you don’t have a stud finder, you can locate the studs by tapping the wall with the base of your palm. The sound should change once you hit the stud area, although this is not a guarantee that you actually locate a stud. Or, tap small nails into the wall close to the skirting board – you’ll know once you hit wood.
- Try to locate the centre of the stud for maximum strength.
- Locate both studs before drilling. One stud may have a metal plate join, meaning you may need to locate your mount slightly higher or lower.
- Drill your holes cautiously – it’s better to drill to small than too big. You need the tightest fit possible with the hardware that you will be using.
- Before mounting your TV, check the strength of your brackets by firmly pulling up and down on them.
Remember, studs can be placed at different intervals. If you can only locate one stud within the desired range, don’t assume that you can use a dry wall anchor on the other. Dry wall anchors can only be used for mounting products specific to this task.
With a little bit of care, you’ll be enjoying your wall-mounted TV in no time at all!