Five-minute video demonstrating AWMS-2-BT75-FS unboxing, initial setup, and mounting two ultrawide displays.
The AWMS-2BT75-FS Installation Guide PDF is the official product setup reference developed by Atdec research and development. It includes a component checklist, important information, and pictograms for each step.
AWMS-2-BT75-FS video highlights
Measure to ensure enough space between displays and to the base of the mount (highlight shown as animation).
Do not move mount with displays attached – position mount in desired location on work surface before attaching displays.
Remove screens before loosening bracket hand knob to adjust height.
Inside rear of bracket (inner guide) should slide into the rear channel of the post.
Cable covers should have angled ends at top and base, for cable ingress & egress. Small cable sit within the larger cable covers.
Inside rear of bracket (inner guide) should slide into the rear channel of the post.
Cable covers should have angled ends at top and base, for cable ingress & egress. Small cable sit within the larger cable covers.
Keep displays straight for most simple setups.
Allow extra space between brackets if tilting curved displays.
Downward force or load at display corners will cause a rocking movement. This is expected. It is recommended you avoid this.
Long service life & 10-year warranty
Atdec products are designed for long service life – generally longer than monitors. So, it is likely that you will put multiple monitors and setups on your mount. Please reread the Installation Guide before adjusting or changing your monitors, and keep these key points top of mind.
Different monitors are okay
- Top & bottom displays can be different size & model
- Adjust tilt to compensate for varying depths
- Having the larger monitor in the lower position promotes stability (recommended)
Remove monitors to move
- Do not move mount with displays attached
- Position mount in desired location
- Then attach or reattach monitors
Remove monitors to adjust bracket
- Remove monitor before loosening bracket with hand knob to adjust main height
- (Fine-tune adjustment knobs are designed to use with displays attached to bracket/mount)
Ready to learn more about our partner network?
We value our partner network highly and treat them like VIPs! Talk to us about opportunities to join and find out why Atdec partners are so satisfied.
Talk to us about your next project